Australian Golf Heritage Society Forum

Welcome to the second incarnation of the Australian Golf Heritage Society forum. All members of the Society are invited to actively participate in the Forum, and to share their experience, knowledge, ideas and wisdom.

As a Guest you are able to read posts, but to contribute you need to register. This is a simple matter of clicking on the 'Register' link, and following your nose. Help is always available if you need it. Please note that this is a forum for the sharing of opinions, ideas and knowledge, and we would ask that you respect everyone's opinions, ideas, and knowledge.

If you disagree with something said, by all means air that disagreement respectfully. If you feel the need to become insulting or abusive, you will quickly feel the need to find another forum. I can do that.

Welcome again - and enjoy.

You are not logged in.

#1 11-01-2016 11:36:42

Pipdog
Putter
Registered: 19-10-2015
Posts: 54

Happy New Year

Had a Popplewell driver missing most of the hosel.  Put head end in plastic bag, then in boiling water for 20 minutes. Shaft slid out. Refitted shaft with slow drying epoxy (Parfix).  Sanded part of a broken shaft and collected sawdust.  Mixed sawdust with PVA glue (Wellbond) to a paste, and formed new hosel.  Let dry for 2 days and sanded to shape.  Completed staining, polyurethane and whipping.  Hit it a few times and still holding together..........


Have a few clubs, mostly junk, but all playable.

Offline

Board footer

Powered by FluxBB 1.5.10